Roof Insulation Compton

Loft insulation top-up from 100mm to 270mm on a standard Compton semi: £300–£500. This is the most cost-effective EPC improvement available and is best carried out while scaffold is in place for any re-roof work.

The current UK minimum for cold roof insulation is 270mm — 100mm between joists and 170mm across. Many Compton Victorian farmhouse and infill properties have only the 100mm installed in the 1980s–90s Government programmes. Top-up is straightforward and significantly improves the EPC rating.

Yes — insulation top-up while scaffold is in place for a Compton re-roof costs significantly less than a separate mobilisation. We include insulation top-up as an add-on option in all Compton re-roof quotes where the existing depth is below 270mm.

Cold roof construction requires ventilation above the insulation layer. Breathable underlay (which we install on all Compton re-roofs) eliminates the need for a separate ventilation path. Old bitumen felt requires ventilation paths that must not be blocked by insulation.

Upgrading from 100mm to 270mm typically improves EPC rating by 1–2 bands. In Compton's property market, an EPC rating improvement from D to C adds measurable value. Insulation is the most cost-effective route to EPC improvement on most Compton Victorian farmhouse and infill properties.

The Energy Company Obligation (ECO) scheme may fund insulation for Compton homeowners on qualifying benefits or with a low EPC rating. Local authority referrals are available. Privately-funded insulation top-up is available for all Compton properties — most cost-effective when combined with re-roofing.

Mineral wool (glass or rock wool) is the standard specification for Compton loft top-ups. It is non-combustible, has zero ozone depleting potential, and performs correctly at the depths required. PIR board is used for warm roof flat roof applications.

No — cold roof loft insulation is installed at ceiling joist level, below the roof deck. The roofing work above is entirely separate. The only interaction is the ventilation specification — which we confirm at survey for each Compton property.

Yes — loft insulation top-up can be carried out independently of any roofing work on most Compton properties with accessible lofts. We survey the loft access, existing insulation depth and ventilation condition before confirming specification.

Upgrading from 100mm to 270mm on a Compton semi: estimated annual saving £150–£250 on heating bills. At an installation cost of £300–£500, the payback period is typically 1.5–3 years. With an EPC improvement, the property value benefit typically exceeds the installation cost on day one.